Manufacturer Part #
ZL30270LDG1S
6-output clock generator (APLL-only), 1D/1SE + 1SE/crystal inputs
Microchip ZL30270LDG1S - Product Specification
Shipping Information:
ECCN:
PCN Information:
Description of Change:Release of updated firmware revision 0x1B5E (7006 decimal) for selected ZL30270, ZL30271, ZL30634A, ZL30640A, ZL30642A, ZL30732A, ZL30733A, ZL30735A, ZL30833A and ZL30934A device families available in 48L (7x7x1mm) and 64L (9x9x1mm) VQFN packages.Reason for Change:To improve productivity by updating the firmware revision to 0x1B5E (7006 decimal) in the fw_ver register at address 0x00005:0x0006. For further details refer to errata DS-80001042A available on request from Microchip website.
Microchip has released a new Datasheet for the ZL30270/1 - 6- or 10-Output, 5-Synthesizer Clock Generators of devices.Description of Change: Table 4-1: Added content in OUT and VDDO6 rows to say that in 7x7 package devices OUT6 is powered from VDDO8 along with OUT8. Added recommendation to the output clock pin description. output_phase_compensation: Added note.synth_phase_compensation: Added note.Reason for Change: To Improve Productivity
Microchip has released a new Product Documents for the ZL30270/71 Data Sheet of devices.Description of Change:1) xo_amp-set: Corrected the xtal_drive_level description to what it should be. Previously it was accidentally the same text asthe xo_osci_sel description2) Table 4-1: In the GPIO description added new recommendation3) Figure 5-1: Added a footnote to part e).4) Section 5.1.4, synth_spread_spectrum_cfg, synth_spred_spectrum_rate, synth_spread_spectrum_spread: Documented these registers5) Figure 9-1: Corrected VOC to VOUT in several places6) Section 5.2.1: Correct last paragraph about voltages allowed for LVDS and LVPECL Reason for Change: To Improve Productivity
Part Status:
Microchip ZL30270LDG1S - Technical Attributes
Type: | Generator |
Interface Type: | SPI/I2C/GPIO |
Input Capacitance: | 3pF |
Clock Input Frequency - Max: | 400MHz |
Clock Output Frequency - Max: | 750MHz |
Supply Voltage-Nom: | 1.71V to 3.465V |
Input Type: | CMOS |
Operating Temp Range: | -40°C to +85°C |
Storage Temperature Range: | -55°C to +125°C |
Package Style: | VQFN-48 |
Mounting Method: | Surface Mount |
Available Packaging
Package Qty:
2 per Cut Tape
Package Style:
VQFN-48
Mounting Method:
Surface Mount