Shipping Country
Free shipping within the continental US over $50. Conditions apply
Select Country
Manufacturer Part #
DT06-12SA
Download the CAD models for this product. Learn more about SnapMagic.
1 per Box
Wire Mount
Shipping Information:
COO is assigned at time of shipping and cannot be selected during the ordering process. All documents will indicate COO at time of shipping
HTS Code:
ECCN:
PCN Information:
Kind of Change:Tooling-Process ChangeProduct Description: DEUTSCH DT Series Plug and Receptacle New Capacity Assembly LineDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is adding a new manual capacity assembly line for the part number(s) listed on the attached SPCN document .TE facility located in Tullahoma, TN, USA. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Representative samples will be offered for each pin arrangement as detailed in the attached document. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) is not affected.Reason for Changes: The new manual assembly line is necessary to improve operating efficiency in the current manufacturing location. The added assembly line does not impact connector performance. IMPORTANT: No fit, form or function change. Parts off the new assembly line are identical to current production. Shipments from current and new tooling configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only):13-JUL-2026Effectivity Date:13-JUL-2026Date of First Samples:29-JUN-2026
Product Description:DEUTSCH DT and DTM interface seals Manufacturing Location ChangeKind of Change:Location ChangeGeneral Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is transferring the interface seal part numbers for DT and DTM from a TE approved supplier located in USA to a TE approved supplier located in Canada. Connectors assemblies will remain at their current manufacturing locations. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tool back to prior location based on business need. PPAP and/or sample requests must be submitted within 14 days (or per contract with TE) of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request.Reason for Changes:Dear Customer, we hereby inform you of the manufacturing location change as a result of global demand and the available capacity of our suppliers and will be phased in gradually. IMPORTANT: Product from the new supplier are the same as the current supplier and does not impact product performance. Shipments from current and new supplier may be mixed.Remarks:Future supplier is located in CanadaFirst Ship Date of Changed Items (Changed Parts Only):06-FEB-2026Last Date for Mixed Shipments: (Changed Parts Only):09-AUG-2027Date of First Samples:06-FEB-2026Effectivity Date:06-FEB-2026
Product Description:DEUTSCH DT Product Family Drawings ClarificationKind of Change:DrawingGeneral Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is implementing a minor drawing change to include connector length with the wedgelock installed on the product drawing(s) Reason for Changes:Dear Customer, We hereby inform you that the Industrial and Commercial Transportation business unit of TE Connectivity is implementing a minor drawing change to include the connector length with the wedgelock installed. This is a drawing update only and does not impact form, fit, function, performance, or the physical parts. Current and previous drawing revisions are interchangeable and may be shipped concurrently.First Ship Date of Changed Items (Changed Parts Only):12-JAN-2026Effectivity Date:12-JAN-2026
General Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is making a minor drawing change to standardize information for the product drawing(s) listed.Reason for Changes:Dear Customer, we hereby inform you of this drawing change. The change is necessary to improve our documentation on out product drawings related to the parts listed below. The change does not impact product design or performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually, and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
General Product Description:Consolidation of production sites; transfer of similar products to the NanTong plant.Description of ChangesConsolidation of production sites; transfer of similar products to the NanTong plant.Reason for Changes:Product improvement .Consolidation of production sites; transfer of similar products to the NanTong plant.First Date To Ship (Changed Parts Only): 15-MAR-2025
General Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is adding new capacity assembly line for the part number(s) listed below in our TE facility located in Tullahoma, TN, USA. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawing(s) is not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. The new tooling is necessary to improve the operating efficiency in the current manufacturing location. The added tooling does not impact connector performance. IMPORTANT: No fit, form or function change. Parts off the new tool are identical to current production. Shipments from current and new tooling configurations may be mixed.
Description of Changes: The ICT business unit of TE is adding a new source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/generalmarket product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occurwithout request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. Theadditional source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change isbeing phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
Part Status:
TE Connectivity has extended its DEUTSCH DT range of connectors for use in harsh conditions, introducing a wire-to-wire snap-cap design. This means that the DT 2/3 series now includes three versions: the existing standard version, the welded seal cover, and the new snap-cap design.
APPLICATIONS• Transportation• Marine equipment• Industrial systems• Aerospace and defense equipment
FEATURES• 13A maximum continuous current• 7.5mΩ maximum contact resistance• Improved wire alignment to maximize seal performance under wire side-load conditions• IP67 or IP68 protecting ratings• Operating-temperature range: -55°C to 125°C
Inventory held at our manufacturer's warehouse. Subject to availability and transit time.
