Microchip | PIC18F85J90-I/PT

• LCD Driver Module Features:
• Direct LCD Panel Drive Capability:
• Can drive LCD panel while in Sleep mode
• Up to 48 Segments and 192 Pixels; Software Selectable
• Programmable LCD Timing module:
• Multiple LCD timing sources available
• Up to 4 commons: static, 1/2, 1/3 or 1/4 multiplex
• Static, 1/2 or 1/3 Bias configuration
• Special Microcontroller Features:
• 1000 Erase/Write Cycle Flash Program Memory, typical
• Flash Retention: 20 Years Minimum
• Self-Programmable under Software Control
• Priority Levels for Interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Extended Watchdog Timer (WDT):
• Programmable period from 4 ms to 131s
• Flexible Oscillator Structure:
• Two Crystal modes, 4-25 MHz
• Two External Clock modes, up to 40 MHz
• Internal Oscillator Block:
• 8 user-selectable frequencies from 31.25 kHz to 8 MHz
• Secondary Oscillator using Timer1 @ 32 kHz
• Low-Power Features:
• Power-Managed modes: Run, Idle, Sleep
• Run current down to 9 μA, typical
• Idle current down to 2.5 μA, typical
• Sleep current down to 0.1 μA, typical
• Peripheral Highlights:
• High-Current Sink/Source: 25 mA/25 mA (PORTB and PORTC)
• Sleep current as low as 100nA
• Up to Four External Interrupts
• Four 8-Bit/16-Bit Timer/Counter modules
• Uses Timer1
• Two Capture/Compare/PWM (CCP) modules:
• Capture is 16-bit, max. resolution 6.25 ns (TCY/16)
• Compare is 16-bit, max. resolution 100 ns (TCY)
• PWM output: PWM resolution is up to 10-bit

View the complete product family of PIC18F Series Microcontrollers