Référence fabricant
MCP604-I/ST
MCP604 Series 6 V 2.8 MHz Single Supply CMOS Operational Amplifier - TSSOP-14
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Microchip | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :96 par Tube Style d'emballage :TSSOP-14 Méthode de montage :Surface Mount | ||||||||||
| Code de date: | |||||||||||
Microchip MCP604-I/ST - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Microchip has released a new Datasheet for the 2.7V to 6.0V Single Supply CMOS Op Amps of devices.Description of Change:Updated Section �Features�.Updated Section 2.0 �Typical Performance Curves�.Updated Section 6.0 �Packaging Information�.Updated Section �Product Identification System�.Added Section �Product Identification System (Automotive)
Statut du produit:
Microchip MCP604-I/ST - Caractéristiques techniques
| Amplifier Type: | General Purpose |
| No of Channels: | 4 |
| Slew Rate-Nom: | 2.3V/µs |
| Input Offset Voltage-Max: | 2mV |
| Gain Bandwidth Product: | 2.8MHz |
| Average Bias Current-Max: | 1pA |
| Supply Voltage: | 2.7V to 6V |
| Common Mode Rejection Ratio: | 90dB |
| Output Type: | Rail to Rail |
| Power Supply Rejection Ratio: | 88dB |
| Operating Temp Range: | -40°C to +85°C |
| DC Voltage Gain: | 115dB |
| Phase Margin: | 50° |
| Low Noise: | 29nV/√Hz |
| Output Current: | 22mA |
| Style d'emballage : | TSSOP-14 |
| Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The MCP604 series of quad operational amplifier (op amp) has a gain bandwidth product of 2.8 MHz with low typical operating current of 230. The MCP604 uses Microchip's advanced CMOS technology, which provides low bias current, high-speed operation, high open-loop gain and rail-to-rail output swing.
The MCP604 operates with a single supply voltage that can be as low as 2.7 V, while drawing less than 325 of quiescent current per amplifier. The MCP604 is available in standard 14-lead PDIP, SOIC and TSSOP packages. This amplifier is ideal for industrial process control, low-power battery-operated devices, portable equipment, data acquisition equipment, test equipment and low-end audio applications.
Features:
- Single-Supply: 2.7 V to 5.5 V
- Rail-to-Rail Output
- Input Range Includes Ground
- Gain Bandwidth Product: 2.8 MHz (typ.)
- Unity-Gain Stable
- Low Quiescent Current: 230 µA/amplifier (typ.)
- Chip Select (CS): MCP603 only
- Temperature Ranges:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
- Available in Single, Dual and Quad
Applications:
- Portable Equipment
- A/D Converter Driver
- Photo Diode Pre-amp
- Analog Filters
- Data Acquisition
- Notebooks and PDAs
- Sensor Interface
View the complete MCP604 series of Operational Amplifiers
Emballages disponibles
Qté d'emballage(s) :
96 par Tube
Style d'emballage :
TSSOP-14
Méthode de montage :
Surface Mount
