Manufacturer Part #
SC16IS740IPW,112
SC16IS740 Series I2C Bus / SPI Interface 5 Mbps Single Channel UART - TSSOP-16
NXP SC16IS740IPW,112 - Product Specification
Shipping Information:
ECCN:
PCN Information:
Part Status:
NXP SC16IS740IPW,112 - Technical Attributes
Data Rate: | 5Mbps |
No of Functions / Channels: | 1 |
Interface Type: | I2C/SPI |
Supply Voltage-Nom: | 2.3V to 3.6V |
Supply Current: | 6mA |
Power Dissipation: | 0.3W |
Output Current: | 10mA |
Clock Frequency-Max: | 80MHz |
Operating Temperature: | -40°C to +95°C |
Storage Temperature Range: | -65°C to +150°C |
Package Style: | TSSOP-16 |
Mounting Method: | Surface Mount |
Features & Applications
The SC16IS740/750/760 is a slave I2C-bus/SPI interface to a single-channel high performance UART. It offers data rates up to 5 Mbit/s and guarantees low operating and sleeping current. The SC16IS750 and SC16IS760 also provide the application with 8 additional programmable I/O pins. The device comes in very small HVQFN24, TSSOP24 (SC16IS750/760) and TSSOP16 (SC16IS740) packages, which makes it ideally suitable for handheld, battery operated applications. This family of products enables seamless protocol conversion from I2C-bus or SPI to and RS-232/RS-485 and are fully bidirectional.
The SC16IS760 differs from the SC16IS750 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS750, and in that it supports IrDA SIR up to 1.152 Mbit/s. In all other aspects, the SC16IS760 is functionally and electrically the same as the SC16IS750. The SC16IS740 is functionally and electrically identical to the SC16IS750, with the exception of the programmable I/O pins which are only present on the SC16IS750.
Features:
- Single full-duplex UART
- Selectable I2C-bus or SPI interface
- 3.3 V or 2.5 V operation
- Industrial temperature range: -40 °C to +95 °C
- 64 bytes FIFO (transmitter and receiver)
- Fully compatible with industrial standard 16C450 and equivalent
- Baud rates up to 5 Mbit/s in 16´ clock mode
- Auto hardware flow control using RTS/CTS
- Auto software flow control with programmable Xon/Xoff characters
- Single or double Xon/Xoff characters
- Automatic RS-485 support (automatic slave address detection)
- Up to eight programmable I/O pins (SC16IS750 and SC16IS760 only)
- RS-485 driver direction control via RTS signal
- RS-485 driver direction control inversion
- Built-in IrDA encoder and decoder interface
- SC16IS750 supports IrDA SIR with speeds up to 115.2 kbit/s
- SC16IS760 supports IrDA SIR with speeds up to 1.152 Mbit/s1
- Software reset
- Transmitter and receiver can be enabled/disabled independent of each other
- Receive and Transmit FIFO levels
- Programmable special character detection
Available Packaging
Package Qty:
96 per Tube
Package Style:
TSSOP-16
Mounting Method:
Surface Mount