Manufacturer Part #
SEK-SFA30
SEK-SFA30 Evaluation Kit Ready to use Including SFA30 Sensor Module
| | |||||||||||
| | |||||||||||
| Mfr. Name: | Sensirion | ||||||||||
| Standard Pkg: | Product Variant Information section Available PackagingPackage Qty:1 per Kit | ||||||||||
| Date Code: | |||||||||||
Sensirion SEK-SFA30 - Product Specification
Shipping Information:
ECCN:
PCN Information:
Part Status:
Sensirion SEK-SFA30 - Technical Attributes
| Application Type: | Dev Tool |
| Core Supported: | SFA30 |
Features & Applications
Evaluation Kit contains:
SFA30 formaldehyde sensor module
UART and I2C interface via 7-pin Molex Micro-Lock Plus connector
Supply voltage VDD: 3.3 or 5.0 V
Size: 46 x 24 x 5.5 mm3
USB-UART cable (7-pin, marked with an orange sleeve) to connect the SFA30 development board directly to a USB port, e.g. on a PC
Jumper wire set (7-pin Micro-Lock Plus cable set) to connect the SFA30 development board to embedded testing platforms like Arduino or Raspberry Pi. A 10-pin 0.1’’ pitch gender changer is also provided.
Cable configuration:
Red cable = VDD
Black cable = GND
Green cable = SDA (I2C) or RX (UART)
Yellow cable = SCL (I2C) or TX (UART)
Blue cable = SEL (Interface select - Connect to GND for I2C, connect to VDD or leave open to select UART)
Purple cable = NC (do not connect)
Grey cable = NC (do not connect)
Available Packaging
Package Qty:
1 per Kit
