Référence fabricant
MCP79520-I/MS
MCP7952X Series 3 V SPI Real-Time Clock Calendar with Battery Switchover
Product Specification Section
Microchip MCP79520-I/MS - Spécifications du produit
Informations de livraison:
L'article ne peut être envoyé à certains pays. Voir la liste
L'article ne peut pas être envoyé aux pays suivants:
ECCN:
EAR99
Informations PCN:
Fichier
Date
ADVISORY
07/13/2022 Détails et téléchargement
Specification Change
04/12/2022 Détails et téléchargement
Microchip has released a new Product Documents for the MCP7951X/MCP7952X Battery-Backed SPI Real-Time Clock/Calendar Data Sheet of devices.Description of Change:- Updated Data Sheet with Automotive part numbers and general fixes.- Replaced terminology �Master� and �Slave� with �Host� and �Client� respectively.Reason for Change: To Improve Productivity
Statut du produit:
Actif
Actif
Microchip MCP79520-I/MS - Caractéristiques techniques
Attributes Table
Date Format: | YY:MM:DD |
Time Format: | HH:MM:SS:hh |
Interface: | SPI |
Non-Volatile Memory Size: | 64B |
Supply Voltage-Nom: | 1.8V to 3.6V |
Temperature Grade: | Industrial |
Operating Temp Range: | -40°C to +85°C |
Storage Temperature Range: | -65°C to +150°C |
Style d'emballage : | MSOP-10 |
Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The MCP79520-I/MS is a low-power Real-Time Clock/ Calendar (RTCC) that uses digital trimming compensation for an accurate clock/calendar, an interrupt output to support alarms and events, a power sense circuit that automatically switches to the backup supply, nonvolatile memory for safe data storage and several enhanced features that support system requirements.
This device is fully accessible through the serial interface, while VCC is between 1.8V and 3.6V, but can operate down to 1.3 V through the backup supply connected to the VBAT input for timekeeping and SRAM retention only.
Features:
- Low Power Operation-VCC Min = 1.8 V-Icc < 5 µA Typical Standby Current
- Low Backup Power-VBAT Min = 1.3 V-Ibat < 700nA Typical Timekeeping & SRAM Retention Current
- Automatic Battery Switchover with Timestamp-VCC to VBAT(VCC Lost)-VBAT to VCC (VCC Restored)
- Dual configurable alarms with a 0.01 sec count on one alarm-IRQ (VCC or VBAT)
- Clock Out frequencies: 32.768, 8.192 & 4.096 KHz and 1 Hz
- Digital Trimming Range from -255 to + 255 ppm in 1 ppm steps-Adjusts up to 22 seconds/day
- EEPROM as 8 Bytes/Page with Block Sector write protection-Protect:None, 1/4, 1/2 or all of array
- Factory standard MAC address programming or custom ID available
Pricing Section
Stock global :
100
États-Unis:
100
Sur commande :
0
Délai d'usine :
7 Semaines
Quantité
Prix Internet
100
$1.38
300
$1.35
400
$1.34
1 000
$1.31
1 500+
$1.28
Product Variant Information section
Emballages disponibles
Qté d'emballage(s) :
100 par Tube
Style d'emballage :
MSOP-10
Méthode de montage :
Surface Mount