Microchip | PIC18F67J10-I/PT

Ideal for cost sensitive applications that benefit from the availability of four serial ports: two synchronous serial ports (I²C™ and SPI™) and two asynchronous (LIN capable) serial ports. Large amounts of Flash program memory and RAM make it ideal for instrumentation panels, TCP/IP enabled embedded applications as well as metering, industrial control and monitoring applications. While operating up to 40 MHz at 3 V, this family of general purpose devices targets cost sensitive designs with 1k Flash endurance, emulated EEPROM, and external crystal or clock source.

Features:

• Special Microcontroller Features:
• Operating Voltage Range: 2.0 V to 3.6 V
• 5.5 V Tolerant Input (digital pins only)
• On-Chip 2.5 V Regulator
• Low-Power, High-Speed CMOS Flash Technology
• C Compiler Optimized Architecture:
• Optional extended instruction set designed to optimize re-entrant code
• Priority Levels for Interrupts
• 8 x 8 Single-Cycle Hardware Multiplier
• Flexible Oscillator Structure:
• Two Crystal modes, up to 40 MHz
• 4x Phase Lock Loop (PLL)
• Two External Clock modes, up to 40 MHz
• Internal 31 kHz Oscillator
• Secondary Oscillator using Timer1 @ 32 kHz
• Two-Speed Oscillator Start-up
• Peripheral Highlights:
• High-Current Sink/Source 25 mA/25 mA (PORTB and PORTC)
• Four Programmable External Interrupts
• Four Input Change Interrupts
• Two Capture/Compare/PWM (CCP) modules
• Three Enhanced Capture/Compare/PWM (ECCP) modules:
• One, two or four PWM outputs
• Selectable polarity
• Programmable dead time
• Auto-shutdown and auto-restart
• External Memory Bus:
• Address Capability of up to 2 Mbytes
• 8-Bit or 16-Bit Interface
• 12-Bit, 16-Bit and 20-Bit Addressing modes