Référence fabricant
DSPIC33EP512MU810-I/PT
dsPIC33EP Series 52kB RAM 536 kB Flash 16-Bit Digital Signal Controller-TQFP-100
Product Specification Section
Microchip DSPIC33EP512MU810-I/PT - Spécifications du produit
Informations de livraison:
L'article ne peut être envoyé à certains pays. Voir la liste
L'article ne peut pas être envoyé aux pays suivants:
ECCN:
3A991.a.2
Cet article peut être assujetti à des contrôles de licence d’exportation.
Informations PCN:
Fichier
Date
Assembly Site Change
03/17/2015 Détails et téléchargement
Final Notice: Qualification of 100L TQFP (12x12x1mm) with 240x240 Lead-Frame Paddle size at ASAC (UDG) assembly site. Pre Change: Assembled at MTAI assembly site.Post Change: Assembled at MTAI and ASAC assembly sites.Please be advised that after the estimated first ship date customers may receive pre and post change parts.
Statut du produit:
Actif
Actif
Microchip DSPIC33EP512MU810-I/PT - Caractéristiques techniques
Attributes Table
Family Name: | dsPIC33EP |
Core Processor: | dsPIC |
Program Memory Type: | Flash |
Flash Size (Bytes): | 536kB |
RAM Size: | 52kB |
Speed: | 70MHz |
No of I/O Lines: | 83 |
InterfaceType / Connectivity: | CAN/IrDA/I2C/LIN/QEI/SPI/UART/USART/USB OTG |
Peripherals: | Brown-out Detect/DMA/Motor Control PWM/POR/PWM/Reset/Watchdog |
Number Of Timers: | 9 |
Supply Voltage: | 3V to 3.6V |
Operating Temperature: | -40°C to +85°C |
On-Chip ADC: | 32-chx10-bit / 32-chx12-bit |
Watchdog Timers: | 1 |
Style d'emballage : | TQFP-100 |
Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The DSPIC33EP512MU810-I/PT is a High Performance, 16 bit Digital Signal Controller with 52 KB RAM and 536 KB Flash, available in TQFP-100 package.
Features:
- Core: 16-bit dsPIC33E/PIC24E CPU:
- Code-efficient architecture
- Two 40-bit wide accumulators
- 32-bit multiply support
- Clock Management:
- 2% internal oscillator
- Programmable PLLs and oscillator clock sources
- Fail-Safe Clock Monitor (FSCM)
- Power Management:
- Low-power management modes
- 1.0 mA/MHz dynamic current
- 60 μA IPD current
- High-Speed PWM:
- Up to seven PWM pairs with independent timing
- Dead Time for rising and falling edges
- Communication Interfaces:
- USB 2.0 OTG-compliant full-speed interface
- Four UART modules (15 Mbps)
- Four 4-wire SPI modules (15 Mbps)
- Data Converter Interface (DCI) module with support for I2S and Audio codecs
- Direct Memory Access (DMA):
- 15-channel DMA with user-selectable priority arbitration
- UART, USB, SPI, ADC, ECAN, IC, OC, Timers, DCI/I2S, PMP
- Input/Output:
- Sink/Source 10 mA on all pins
- 5 V-tolerant pins
- Selectable open drain, pull-ups, and pull-downs
- Up to 5 mA overvoltage clamp current
- External interrupts on all I/O pins
Pricing Section
Stock global :
0
États-Unis:
0
Délai d'usine :
4 Semaines
Quantité
Prix Internet
1
$10.09
4
$9.95
15
$9.82
25
$9.77
50+
$9.61
Product Variant Information section
Emballages disponibles
Qté d'emballage(s) :
119 par Tray
Style d'emballage :
TQFP-100
Méthode de montage :
Surface Mount