Référence fabricant
SEK-SCD41-SENSOR
SCD41 CO2 Sensor Development Board (Works with SEK-SENSORBRIDGE)
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Sensirion | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :1 par Kit Méthode de montage :PCB Mount | ||||||||||
| Code de date: | 2330 | ||||||||||
Sensirion SEK-SCD41-SENSOR - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
UPDATE: shows new improved version of SCD4x and SEK-SCD41-Sensor first shipments will begin on 05-22-2023 (From April). Change Description: This Infoletter covers a set of changes to the SCD41, part of the SCD4x product family. Increased peak reflow soldering temperature The peak reflow soldering temperature for the SCD4x is increased from 235�C to 245�C for closer alignment with reflow soldering standards (IPC/JEDEC J-STD-020). The increased peak reflow soldering temperature will have no impact on sensor function and any previously established reflow profiles can be maintained. Second source for the microphone A 2nd source for the microphone (a sub-component of the SCD4x products) has been established to increase the resili-ence of the supply chain. The 2nd source has been qualified to meet equivalent performance as the 1st source. Both sources may be used interchangeably on any of the SCD4x product family members. Device marking A laser marking on the side of the cap will be introduced containing the product type (e.g. SCD40) and serial number within a QR code. The laser marking will have no impact on dimensions or function of the cap.
Statut du produit:
Sensirion SEK-SCD41-SENSOR - Caractéristiques techniques
| Type: | Air Quality |
| Accuracy: | ±40% |
| Output Type: | I2C |
| Response Time: | 60s |
| Supply Voltage: | 2.4V to 5.5V |
| Supply Current: | 205mA |
| Operating Temp Range: | -10°C to +60°C |
| Storage Temperature Range: | 10°C to 50°C |
| Méthode de montage : | PCB Mount |
Fonctionnalités et applications
Evaluation Kit contains:
SCD41 Development Board
I2C interface
Vdd range: 2.4 to 5.5 V
Peak current @ 3.3 V: 205 mA
Peak current @ 5 V: 137 mA
Adapter cable to connect the SCD41 development board to SensorBridge
Jumper wire set to connect the SCD41 development board to embedded platform
Cable configuration:
Green cable = SDA
Red cable = VDD
Yellow cable = SCL
black cable = GND
Emballages disponibles
Qté d'emballage(s) :
1 par Kit
Méthode de montage :
PCB Mount
