Référence fabricant
CA3130EZ
CA3130 Series 15 MHZ 30 V/µs 16 V BiMOS Operational Amplifier - PDIP-8
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Renesas | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :50 par Tube Style d'emballage :PDIP-8 Méthode de montage :Surface Mount | ||||||||||
| Code de date: | 2309 | ||||||||||
Renesas CA3130EZ - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
This advisory is to inform you that Intersil has updated the minimum line quantity (MLQ) for the parts listed in this notice. These changes will affect all orders placed on the books on or after 3/1/2015 but will not affect any orders currently on the books or placed on the books prior to that date.
Statut du produit:
Renesas CA3130EZ - Caractéristiques techniques
| Amplifier Type: | General Purpose |
| No of Channels: | 1 |
| Slew Rate-Nom: | 30V/µs |
| Input Offset Voltage-Max: | 5mV |
| Gain Bandwidth Product: | 15MHz |
| Average Bias Current-Max: | 50pA |
| Supply Voltage: | 5V to 16V |
| Common Mode Rejection Ratio: | 90dB |
| Supply Current: | 10mA |
| Output Type: | CMOS |
| Power Supply Rejection Ratio: | 90dB |
| Operating Temp Range: | -55°C to +125°C |
| DC Voltage Gain: | 110dB |
| Output Current: | 45mA |
| Style d'emballage : | PDIP-8 |
| Méthode de montage : | Surface Mount |
Fonctionnalités et applications
This device operate at supply voltages ranging from 5 V to 16 V, (±2.5 V to ±8 V). It can be phase compensated with a single external capacitor, and have terminals for adjustment of offset voltage for applications requiring offset-null capability. The terminal provisions are also made to permit strobing of the output stage
Features:
- MOSFET Input Stage Provides:
- Very High ZI = 1.5 TΩ (1.5 x 1012Ω) (Typ)
- Very Low II . . . . . . . . . . . . . 5pA (Typ) at 15 V Operation
- . . . . . . . . . . . . . . . . . . . . . .= 2pA (Typ) at 5 V Operation
- Ideal for Single-Supply Applications
- Common-Mode Input-Voltage Range Includes Negative Supply Rail; Input Terminals can be Swung 0.5 V Below Negative Supply Rail
- CMOS Output Stage Permits Signal Swing to Either (or both) Supply Rails
- Pb-Free Plus Anneal Available (RoHS Compliant)
Applications:
- Ground-Referenced Single Supply Amplifiers
- Fast Sample-Hold Amplifiers
- Long-Duration Timers/Monostables
- High-Input-Impedance Comparators (Ideal Interface with Digital CMOS)
- High-Input-Impedance Wideband Amplifiers
- Voltage Followers
- Peak Detectors
- Single-Supply Full-Wave Precision Rectifiers
- Photo-Diode Sensor Amplifiers
Emballages disponibles
Qté d'emballage(s) :
50 par Tube
Style d'emballage :
PDIP-8
Méthode de montage :
Surface Mount