Référence fabricant
DT04-3P-CE02
DT Series 3 Position Latch Holder Male Pin Free Hanging Receptacle Housing
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | TE Connectivity | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :1 par Bag Méthode de montage :Cable Mount | ||||||||||
| Code de date: | 2419 | ||||||||||
TE Connectivity DT04-3P-CE02 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
General Product Description:DEUTSCH DT 2&3-Way Plug and Receptacle Additional Manufacturing Location. PCN Clarification for PCN-23-164080.Description of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is making a clarification of the change of PCN-23-164080 for the part numbers listed below.Reason for Changes:Dear Customer, TEC ICT global product supply has continued to grow outside of APAC markets. In response to this change, TEC ICT is implementing a local for local footprint strategy to better support these global market trends. Advantages are shorter lead times, simplified logistics and flexibility to support local markets.First Ship Date of Changed Items (Changed Parts Only):27-MAY-2023
Description of ChangesTE-ICT is introducing an additional manufacturing location in China. CN will be added for those PNs manufactured in China to indicate the country of origin. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted via ict-ppap-request@te.com or ePPAP system. PPAPs will be completed by part family and will be available upon request only. All PPAP requests must be received within 14 days of receipt of this notification.Reason for Changes:Dear Customer, we hereby inform you of this change. TE-ICT will be adding a new manufacturing location to supply the APAC region. IMPORTANT: All products built in TE s approved locations can be used interchangeably in the field.
General Product Description:DEUTSCH DT Plug & Receptacle Process ChangeDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is making a change to the molding process from using pre-colored resin to color at the press resin. This change is applicable to all North American manufacturing locations. The affected part numbers are listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. This process allows flexibility and mitigates exposure to material shortages. The natural resin is the same as the pre-colored base resin and V-0 rating. There is no appearance change to parts manufactured with color at the press. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change is being phased gradually and previous revision can remain stocked until use. Shipments may be mixed.First Ship Date of Changed Items (Changed Parts Only: 01-NOV-2022
General Product Description: DT 2 to 12 ways series connector Description of Changes The ICT business unit of TE is adding a fourth source material for the part numbers listed below. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: Dear Customer, we hereby inform you of this change. The change is needed as a result of global demand in excess of PA66 and the available capacity of our suppliers. The additional source material does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed. Product Category:ConnectorsChange Feature: Dual SourceKind of Change: MaterialPotential Customer Impact: No Customer ImpactFirst Ship Date of Changed Items (Changed Parts Only): 29-JUL-2022Last Date for Mixed Shipments: (Changed Parts Only): 30-JUN-2024
Statut du produit:
TE Connectivity DT04-3P-CE02 - Caractéristiques techniques
| Connector Type: | Receptacle |
| No of Positions: | 3 |
| No of Rows: | 3 |
| Gender: | Male |
| Type: | Housing |
| Pitch: | 8.7 mm |
| Style/Orientation: | Free Hanging Plug |
| Termination: | Crimp |
| Material: | Polyamide |
| Color: | Black |
| Fastening Type: | Latch Holder |
| Méthode de montage : | Cable Mount |
Fonctionnalités et applications
TE Connectivity has extended its DEUTSCH DT range of connectors for use in harsh conditions, introducing a wire-to-wire snap-cap design. This means that the DT 2/3 series now includes three versions: the existing standard version, the welded seal cover, and the new snap-cap design.
APPLICATIONS
• Transportation
• Marine equipment
• Industrial systems
• Aerospace and defense equipment
FEATURES
• 13A maximum continuous current
• 7.5mΩ maximum contact resistance
• Improved wire alignment to maximize seal performance under wire side-load conditions
• IP67 or IP68 protecting ratings
• Operating-temperature range: -55°C to 125°C
Emballages disponibles
Qté d'emballage(s) :
1 par Bag
Méthode de montage :
Cable Mount