Référence fabricant
1-968857-1
MCP2.8 Series 14-16 AWG Tin Plated Contact Crimp Socket
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | TE Connectivity | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :4000 par Reel Méthode de montage :Wire Mount | ||||||||||
| Code de date: | 2423 | ||||||||||
TE Connectivity 1-968857-1 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
General Product Description:Change in Delivery Unit & Minimum Order QuantityDescription of ChangesThis product change notification (PCN) is to inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of April 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN.Reason for Changes:New specification.To assure standardized and uniform packaging for each basic product part number, to improve sustainability and minimize quality risks.First Date To Ship (Changed Parts Only): 20-APR-2023Last Date for Mixed Shipments: (Changed Parts Only): 20-JUN-2023
General Product Description:Explanation for a new duplication production tool 11-1962266 for AMP MCP2.8 CONTACT SWSDescription of ChangesManufacturing location change. Following Part Numbers (1-968855-1/1-968855-2 /1-968855-3/1-968857-1/1-2141859-1)will be transferred from TE Germany plant to TE Suzhou plantReason for Changes:Dear Customer, we hereby inform you about a transfer of tools and/or processes. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products. The new manufacturing location operates under a certified quality management system in accordance with standard automotive requirements. A TE-internal release test based on the relevant part specifications will be executed before delivery. Upon request, a PPAP Level 2 will be available if it concerns a transfer of a tool which produces a finished TE-product. A PPAP Level 1 will be available if it concerns a component of a TE-product, where the production location of the finished TE-product remains unchanged. If you require such a PPAP, please notify the responsible TE Sales Contact within 14 calendar days after receipt of this PCNFirst Date To Ship (Changed Parts Only):17-NOV-2022
General Product Description:PRODUCT GROUP DRAWING FOR Tabellenzeichnung fuer AMP MCP 2.8Description of ChangesNo Form Fit Function Change. Further PCN P-20-018820 was written on 23MAR2020 with the following explanation: Standardization of the silver material for the AMP MCP 2.8. The Plating has changed in the connection area from Ag to Sn (state of the art for connection areas). The base material and the plating in the contact area remain the same. AMP MCP 2.8 Revision E revised to Rev F for all silver variants, except PN 1-2141857-3 and PN 1-2141859-3, revised from Rev A to Rev B. Please also take a look at former PCN P-20-018820 from 23MAR2020. Now we adapted the part change to the drawing.Reason for Changes:Update made to improve document clarityFirst Ship Date of Changed Items (Changed Parts Only): 14-SEP-2022
Description of ChangesDear Customer, we hereby inform you about tool and/or process transfers within TE Connectivity. As a result of a thorough analysis of our global operations and footprint matching the customer needs in a global supply chain, we are going to reorganize our EMEA manufacturing sites. These reorganizations will support the need of our customers for shorter lead-times and optimized value streams, which are not only generating efficiencies, but also consistency in quality and reducing our CO2 footprint by avoiding unnecessary transportations.Reason for Changes:The transfer from TE Steinach(CH) to TE Kurim(CZ) follows a strict procedure which fully maintains quality, ability to supply and form-fit-function of concerned products. The receiving manufacturing locations operates under a certified Quality Management System in accordance with standard automotive requirements and respective customer specific requirements. TE Connectivity will and has initiated appointments with our customers to share the details about the upcoming changes and the proposals in terms of notification, validation, release and PPAP scenarios for the different product groups affected. In case any PPAP is required for customer owned tools and / or finished good parts saleable part numbers, we kindly ask you to get in touch with your Sales representative first to achieve a common understanding and agreement on both sides.
General Product Description:AMP MCP 1.5K, CONTACT / AMP MCP 2.8, CONTACT SWSDescription of ChangesDear Customer, we hereby inform you about tool and/or process transfers within TE Connectivity. As a result of a thorough analysis of our global operations and footprint matching the customer needs in a global supply chain, we are going to reorganize our EMEA manufacturing sites. These reorganizations will support the need of our customers for shorter lead-times and optimized value streams, which are not only generating efficiencies, but also consistency in quality and reducing our CO2 footprint by avoiding unnecessary transportations.Reason for Changes:The transfer from TE Steinach(CH) to TE Kurim(CZ) follows a strict procedure which fully maintains quality, ability to supply and form-fit-function of concerned products. The receiving manufacturing locations operates under a certified Quality Management System in accordance with standard automotive requirements and respective customer specific requirements. TE Connectivity will and has initiated appointments with our customers to share the details about the upcoming changes and the proposals in terms of notification, validation, release and PPAP scenarios for the different product groups affected. In case any PPAP is required for customer owned tools and / or finished good parts saleable part numbers, we kindly ask you to get in touch with your Sales representative first to achieve a common understanding and agreement on both sides.First Date To Ship (Changed Parts Only): 07-NOV-2022
General Product Description: AMP MCP 2.8, CONTACT SWS Description of Changes Manufacturing location change. Following Part Numbers will be transferred from Outside Supplier to TE Kurim. Reason for Changes: Dear Customer, we hereby inform you about a transfer of tools and/or processes. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products. The new manufacturing location operates under a certified quality management system in accordance with standard automotive requirements. A TE-internal release test based on the relevant part specifications will be executed before delivery. Upon request, a PPAP Level 2 will be available if it concerns a transfer of a tool which produces a finished TE-product. A PPAP Level 1 will be available if it concerns a component of a TE-product, where the production location of the finished TE-product remains unchanged. If you require such a PPAP, please notify the responsible TE Sales Contact within 14 calendar days after receipt of this PCN First Date To Ship (Changed Parts Only): 20-JUN-2022
General Product Description: AMP MCP 2.8, CONTACT SWS Description of Changes Dear Customer, we hereby inform you about the duplication of a stamping tool for TE component PN 1-968857-1 AMP MCP 2.8, CONTACT SWS". Tool build and production at the supplier SCHROEDER + BAUER Werkzeugbau Stanztechnik GmbH + Co. KG . Reason for Changes: Product improvement.As a result of our continuous strive for capacity increase of our production, we hereby inform you upfront about a new tool 11-1959241, which is built in order to meet all specification requirements to cover increasing market demand, and which will run in addition to the current one. First Date To Ship (Changed Parts Only): 20-MAY-2022
Statut du produit:
TE Connectivity 1-968857-1 - Caractéristiques techniques
| Style: | Insulation Support |
| Type: | Receptacle |
| Wire Gauge: | AWG 14-16 |
| Contact Plating: | Tin |
| Current Rating: | 22A |
| Gender: | Female |
| Operating Temp Range: | -40°C to +130°C |
| Voltage Rating: | 300V |
| Shielding: | No |
| Méthode de montage : | Wire Mount |
Emballages disponibles
Qté d'emballage(s) :
4000 par Reel
Méthode de montage :
Wire Mount