Référence fabricant
SEK-SFA30
SEK-SFA30 Evaluation Kit Ready to use Including SFA30 Sensor Module
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Sensirion | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :1 par Kit | ||||||||||
| Code de date: | |||||||||||
Sensirion SEK-SFA30 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Statut du produit:
Sensirion SEK-SFA30 - Caractéristiques techniques
| Application Type: | Dev Tool |
| Core Supported: | SFA30 |
Fonctionnalités et applications
Evaluation Kit contains:
SFA30 formaldehyde sensor module
UART and I2C interface via 7-pin Molex Micro-Lock Plus connector
Supply voltage VDD: 3.3 or 5.0 V
Size: 46 x 24 x 5.5 mm3
USB-UART cable (7-pin, marked with an orange sleeve) to connect the SFA30 development board directly to a USB port, e.g. on a PC
Jumper wire set (7-pin Micro-Lock Plus cable set) to connect the SFA30 development board to embedded testing platforms like Arduino or Raspberry Pi. A 10-pin 0.1’’ pitch gender changer is also provided.
Cable configuration:
Red cable = VDD
Black cable = GND
Green cable = SDA (I2C) or RX (UART)
Yellow cable = SCL (I2C) or TX (UART)
Blue cable = SEL (Interface select - Connect to GND for I2C, connect to VDD or leave open to select UART)
Purple cable = NC (do not connect)
Grey cable = NC (do not connect)
Emballages disponibles
Qté d'emballage(s) :
1 par Kit
