Manufacturer Part #
MCP73123-22SI/MF
MCP73123 Series 16V Lithium Iron Phosphate Battery Charge Management Controller
Microchip MCP73123-22SI/MF - Product Specification
Shipping Information:
ECCN:
PCN Information:
Revised the qualification report (Future PCN 41261)Final Notice: Qualification of G700LTD molding compound and 8600 die attach epoxy for selected DFN, TDFN, UDFN and VDFN packages at NSEB site.Description of Change:Qualification of G700LTD molding compound and 8600 die attach epoxy for 6L DFN (2x2x0.9mm), 8L DFN (2x3x0.9mm), 8L DFN (4x4x0.9mm), 10L DFN (3x3x0.9mm), 8L TDFN (2x3x0.8mm), 8L UDFN (2x3x0.5mm), 10L UDFN (3x3x0.5mm), 8L VDFN (4x4x1.0mm) and 8L VDFN (5x5x1.0mm) packages at NSEB assembly site.Pre Change: G770HCD molding compound and 8200T die attach epoxyPost Change: G700LTD molding compound and 8600 die attach epoxyReason for Change: To improve manufacturability by qualifying molding compound and die attach material.
Final Notice: Qualification of G700LTD molding compound and 8600 die attach epoxy for selected DFN, TDFN, UDFN and VDFN packages at NSEB site.Description of Change:Qualification of G700LTD molding compound and 8600 die attach epoxy for 6L DFN (2x2x0.9mm), 8L DFN (2x3x0.9mm), 8L DFN (4x4x0.9mm), 10L DFN (3x3x0.9mm), 8L TDFN (2x3x0.8mm), 8L UDFN (2x3x0.5mm), 10L UDFN (3x3x0.5mm), 8L VDFN (4x4x1.0mm) and 8L VDFN (5x5x1.0mm) packages at NSEB assembly site.Pre Change: G770HCD molding compound and 8200T die attach epoxyPost Change: G700LTD molding compound and 8600 die attach epoxyReason for Change:To improve manufacturability by qualifying molding compound and die attach material.
Part Status:
Microchip MCP73123-22SI/MF - Technical Attributes
Configuration: | Linear |
Number of Cells: | 1 |
Supply Voltage: | 4V to 16V |
Operating Temp Range: | -40°C to +85°C |
Package Style: | DFN-10 |
Mounting Method: | Surface Mount |
Features & Applications
The MCP73123-22SI/MF is a highly integrated Lithium Iron Phosphate(LiFePO4) battery charge management controller for use in space-limited and cost-sensitive applications. Available in surface mount DFN-10 package.
Features:
- Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
- Constant Current / Constant Voltage Operation with Thermal Regulation
- 4.15V Undervoltage Lockout (UVLO)
- 18V Absolute Maximum Input with OVP:6.5V - MCP73123
- High Accuracy Preset Voltage Regulation
- Through Full Temperature Range (-5°C to +55°C): ±0.5%
- Battery Charge Voltage Options:3.6V
- Resistor Programmable Fast Charge Current: 130 mA - 1100 mA
- Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
- Integrated Precondition Timer: 32 Minutes or Disable
- Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio: 5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or Disable
- Automatic Recharge:
- Available Options: 95% or Disable
- Factory Preset Charge Status Output: On/Off or Flashing
- Soft Start
- Temperature Range: -40°C to +85°C
Applications:
- Low-Cost LiFePO4 Battery Chargers
- Power Tools
- Toys
Available Packaging
Package Qty:
120 per Tube
Package Style:
DFN-10
Mounting Method:
Surface Mount