
Manufacturer Part #
1-1418390-1
DEUTSCH Heavy Duty Sealed Connector 4 Position AMP MCP 2.8 Receptacle Housing
TE Connectivity 1-1418390-1 - Product Specification
Shipping Information:
ECCN:
PCN Information:
eneral Product Description:Heavy Duty Sealed Connector Series Product Family Tab Housing of Group A, B and C; Cavity Block of Group B and CDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is approving an alternative PBT-GF30 material for the part numbers listed below. These part numbers are TE proprietary designs, therefore considered catalog/general market product. PPAP and/or sample requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. Submission will not occur without request. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. This is a continuation of the measure which was first communicated with PCN-21-101563. The change is required to avoid material shortages. The change does not impact performance of the product. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change is being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.
General Product Description:Heavy Duty Sealed Connector Series Product Family Rec and Tab Housing Group A-EDescription of ChangesThe Industrial and Commercial Transportation business unit of TE Connectivity is changing the packaging for the part numbers listed below. Additional layers of paper cushion and a plastic bag will be added to the carton box. Packaging dimension, the MOQ and Standard Package Quantity will not change. Product drawings are not affected. These PNs are TE proprietary designs, therefore considered catalog/general market product. PPAPs will not be submitted for this change since product fit, form and function is not affected.Reason for Changes:Dear Customer, we hereby inform you of this change. The change is necessary to improve the quality of the packaging so that the finished product is better protected when shipped in a single box. The change does not impact connector performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The changes are being phased in gradually and previous revision can remain stocked until use. Shipments of both configurations may be mixed.First Ship Date of Changed Items (Changed Parts Only): 28-FEB-2023Last Date for Mixed Shipments: (Changed Parts Only): 29-SEP-2023
General Product Description:4 POS AMP MCP 2.8 REC HSGDescription of ChangesFor the following parts we have built a Duplication tool : 21-1963795Reason for Changes:Customer Request.Customer Request, Dear customer, we hereby inform you about a tool Duplication of a molding tool for the mentioned part-Numbers. As result of our continuous strive for quality improvements of our production, we hereby inform you upfront about a Duplication tool, which is under construction in order to meet all specification requirements.
General Product Description: 4 POS AMP MCP 2.8 REC HSG Description of Changes For the attached parts we have built a duplication tool : 21-1963796 Reason for Changes: Customer Request.Customer Request, Dear customer, we hereby inform you about a tool Duplication of a molding tool for the above mentioned part-Numbers. As result of our continuous strive for quality improvements of our production, we hereby inform you upfront about a Duplication tool, which is under construction in order to meet all specification requirements. First Date To Ship (Changed Parts Only): 11-AUG-2022
General Product Description: Heavy Duty Sealed Connector Series Product Family REC and TAB Housing Group A - E Description of Changes The Industrial and Commercial Transportation Business Unit of TE Connectivity is transferring manufacturing of the part number(s) (PNs) listed below from TE Connectivity Woert, Germany to TE Connectivity Tangier, Morocco. Components and finished goods will have TE INTERNAL validation & RELEASE only to initiate shipment to avoid any potential line stops at customer side. TE Connectivity will remain the same quality controls. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tools back to the prior manufacturing location based on business need. PPAP requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. No samples will be provided as TE considers parts to be exchangeable independent from type and location of assembly process. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: This change is necessary to ensure capacity and prevent future supply chain disruptions in EMEA. The change does not impact performance, form, fit and function. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The changes are being phased in gradually. Reason for Changes: Manufacturing location change Product Category: ConnectorsChange Feature: No Feature ChangeKind of Change: Location ChangePotential Customer Impact: No Customer ImpactFirst Ship Date of Changed Items (Changed Parts Only): 31-JUL-2022Last Date for Mixed Shipments: (Changed Parts Only):No Mixed Shipments
General Product Description: Cancellation of PCN-22-136 (FPCN 89561)General Product Description: Heavy Duty Sealed Connector Series Product Family Rec and Tab Housing Group A-E Product Category: ConnectorsChange Feature: No Feature ChangeKind of Change:Location ChangePotential Customer Impact: LocalizationFirst Ship Date of Changed Items (Changed Parts Only): 31-JUL-2022
General Product Description: Heavy Duty Sealed Connector Series Product Family Rec and Tab Housing Group A-E Description of Changes The Industrial and Commercial Transportation Business Unit of TE Connectivity is transferring manufacturing of the part number(s) (PNs) listed below from TE Connectivity Woert, Germany to TE Connectivity Tangier, Morocco. Components and finished goods will have TE INTERNAL validation & RELEASE only to initiate shipment to avoid any potential line stops at customer side. TE Connectivity will remain the same quality controls. These PNs are TE proprietary designs, therefore considered catalog/general market product. TE reserves the right to move tools back to the prior manufacturing location based on business need. PPAP requests must be submitted within 14 days of PCN submission via ict-ppap-request@te.com or ePPAP system. No samples will be provided as TE is not changing machines or manufacturing processes and parts considered to be exchangeable independent from type and location of assembly process. If PPAP requested, disposition response is required within 14 days of submit date or it will be considered approved. Product drawings are not affected. Reason for Changes: This change is necessary to ensure capacity and prevent future supply chain disruptions in EMEA. The change does not impact performance. IMPORTANT: The current and previous revisions of these parts can be used interchangeably in the field. The change(s) are being phased in gradually. Reason for Changes: Manufacturing location change Product Category: ConnectorsChange Feature: No Feature ChangeKind of Change:Location ChangePotential Customer Impact: LocalizationFirst Ship Date of Changed Items (Changed Parts Only): 31-JUL-2022
Part Status:
Available Packaging
Package Qty:
1 per Box