Les commandes expédiées à l’extérieur des États-Unis seront en attente pendant que l’entreprise évalue les impacts tarifaires.
Veuillez contacter votre vendeur pour obtenir de l’aide.
Référence fabricant
1123343-1
Automotive Connector 025 REC CONTACT
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | TE Connectivity | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :44000 par Reel Méthode de montage :Wire Mount | ||||||||||
| Code de date: | 2406 | ||||||||||
TE Connectivity 1123343-1 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Description of Changes This PCN Affects customers purchasing from TE Japan only. Adding TE China for alternate manufacturing source. PN is currently in mass production at that location.Reason for Changes: Currently, Kakegawa in Japan is facing with limited capacity due to manpower issue. So, please utilize alternate source, China, as shown in this PCN in case you have supply issue from Japan. If you have any concerned matter and question (PPAP, schedule and other issue), please contact Automotive SCM Manager/Yamashita, Mitsutoshi (yamashita.mitsutoshi@te.com).
Description of Changes: This product change notification (PCN) is to inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. Change was already communicated via P-23-024531 but new PCN informs about postponed activation date: As of February 20, 2024 we will increase the delivery unit & the min. order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN. It is kindly requested to adjust order quantities before the activation on February 20, 2024 to avoid blocked orders.Reason for Changes: New specification. To assure standardized and uniform packaging for each basic product part number, to improve sustainability and minimize quality risks.
General Product Description:025 Receptacle contactDescription of ChangesThis Product Change Notification (PCN) is to inform about a transfer of stamping tool 11-0254971 from TE Thailand to TE Wagholi, India. The transfer follows a strict procedure, which fully maintains quality, ability to supply and form-fit-function of the concerned products, including internal release and product validation as per OEM/CAM requirements, where applicable. The new manufacturing location operates under a certified quality management system in accordance with defined requirements. PPAP/PSW will be prepared (as per agreements between the two parties, including the negotiated TE trigger matrix), a request via ePPAP (via www.te.com or request to TE Sales representative) needs to be initiated by Customer within 2 weeks after receiving of this PCN. In case no request is obtained till above mentioned date, PPAP/PSW will be considered as approved and the change is considered as fully releasedReason for Changes:As a result of a thorough analysis of demand picture, matching our customer needs, we are going to optimize value stream of PNs in scope of this PCN. This transfer will support the need of our customers for shorter lead-times and optimized value streams.
Description of ChangesTerminal reeling quantity will be increased. No any changes on the products. Running change.Reason for Changes:Product improvement.New quantity will be different by PN. See attached file. Please contact your TE account manager for the concerned matter. Contact person: Hidetaka Homme(homme.hidetaka@te.com)
General Product Description:Change in Delivery Unit & Minimum Order QuantityDescription of Changes:This product change notification (PCN) is to inform you about a change in delivery unit & minimum order quantity (MOQ) impacting PNs listed below in this PCN. As of July 20, 2023 we will increase the delivery unit & the minimum order quantity according to attached file. The order quantity should therefore be not less than the MOQ and should be dividable through the MOQ. Dimensions and material of product and shipping box will stay the same. The change has no impact to form-fit-function. TE Change process follows a strict procedure, which fully maintains quality and ability to supply. The product in scope of this PCN is TE general sales / catalogue product, therefore TE reserves the right to determine delivery unit & MOQ. No PPAP will be submitted for this PCN.Reason for Changes:New specification.New specification to assure standardized and uniform packaging for each basic product part number, to improve sustainability and minimize quality risks.
General Product Description:Packing changing of RECEPTACLE CONTACTDescription of ChangesTerminal reeling quantity will be increased. No any changes on the products. Running change.Reason for Changes:Product improvement.New quantity will be different by PN. See attached file. Please contact your TE account manager for the concerned matter. Contact person: Takayuki Minematsu(minematsu.takayuki@te.com)First Date To Ship (Changed Parts Only):20-APR-2023
General Product Description:Various Materials (Same Dual Source)Description of ChangesAffects customers purchasing from TE Thailand only. Adding TE Japan for alternate manufacturing source. PN is currently in series production at that location. Material Name (same Dual source): 025 REC CONTACT 025 ECU PLUG HSG ASSY 32P 025 ECU PLUG HSG ASSY 16PReason for Changes:Product improvement. Additional part source to improve delivery constraints.First Date To Ship (Changed Parts Only):01-SEP-2022
Statut du produit:
TE Connectivity 1123343-1 - Caractéristiques techniques
| Type: | Contact |
| Current Rating: | 4A |
| Termination Style: | Crimp |
| Contact Plating: | Tin |
| Wire Gauge: | AWG 24-20 |
| Material: | Copper°C |
| Operating Temp Range: | -40°C to +120°C |
| Méthode de montage : | Wire Mount |
Emballages disponibles
Qté d'emballage(s) :
44000 par Reel
Méthode de montage :
Wire Mount