Référence fabricant
MCP73123-22SI/MF
MCP73123 Series 16V Lithium Iron Phosphate Battery Charge Management Controller
Microchip MCP73123-22SI/MF - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Revised the qualification report (Future PCN 41261)Final Notice: Qualification of G700LTD molding compound and 8600 die attach epoxy for selected DFN, TDFN, UDFN and VDFN packages at NSEB site.Description of Change:Qualification of G700LTD molding compound and 8600 die attach epoxy for 6L DFN (2x2x0.9mm), 8L DFN (2x3x0.9mm), 8L DFN (4x4x0.9mm), 10L DFN (3x3x0.9mm), 8L TDFN (2x3x0.8mm), 8L UDFN (2x3x0.5mm), 10L UDFN (3x3x0.5mm), 8L VDFN (4x4x1.0mm) and 8L VDFN (5x5x1.0mm) packages at NSEB assembly site.Pre Change: G770HCD molding compound and 8200T die attach epoxyPost Change: G700LTD molding compound and 8600 die attach epoxyReason for Change: To improve manufacturability by qualifying molding compound and die attach material.
Final Notice: Qualification of G700LTD molding compound and 8600 die attach epoxy for selected DFN, TDFN, UDFN and VDFN packages at NSEB site.Description of Change:Qualification of G700LTD molding compound and 8600 die attach epoxy for 6L DFN (2x2x0.9mm), 8L DFN (2x3x0.9mm), 8L DFN (4x4x0.9mm), 10L DFN (3x3x0.9mm), 8L TDFN (2x3x0.8mm), 8L UDFN (2x3x0.5mm), 10L UDFN (3x3x0.5mm), 8L VDFN (4x4x1.0mm) and 8L VDFN (5x5x1.0mm) packages at NSEB assembly site.Pre Change: G770HCD molding compound and 8200T die attach epoxyPost Change: G700LTD molding compound and 8600 die attach epoxyReason for Change:To improve manufacturability by qualifying molding compound and die attach material.
Statut du produit:
Microchip MCP73123-22SI/MF - Caractéristiques techniques
Configuration: | Linear |
Number of Cells: | 1 |
Supply Voltage: | 4V to 16V |
Operating Temp Range: | -40°C to +85°C |
Style d'emballage : | DFN-10 |
Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The MCP73123-22SI/MF is a highly integrated Lithium Iron Phosphate(LiFePO4) battery charge management controller for use in space-limited and cost-sensitive applications. Available in surface mount DFN-10 package.
Features:
- Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
- Constant Current / Constant Voltage Operation with Thermal Regulation
- 4.15V Undervoltage Lockout (UVLO)
- 18V Absolute Maximum Input with OVP:6.5V - MCP73123
- High Accuracy Preset Voltage Regulation
- Through Full Temperature Range (-5°C to +55°C): ±0.5%
- Battery Charge Voltage Options:3.6V
- Resistor Programmable Fast Charge Current: 130 mA - 1100 mA
- Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
- Integrated Precondition Timer: 32 Minutes or Disable
- Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio: 5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or Disable
- Automatic Recharge:
- Available Options: 95% or Disable
- Factory Preset Charge Status Output: On/Off or Flashing
- Soft Start
- Temperature Range: -40°C to +85°C
Applications:
- Low-Cost LiFePO4 Battery Chargers
- Power Tools
- Toys
Emballages disponibles
Qté d'emballage(s) :
120 par Tube
Style d'emballage :
DFN-10
Méthode de montage :
Surface Mount