NXP | SC16IS752IPW,112

The SC16IS752/SC16IS762 is an I2C-bus/SPI bus interface to a dual-channel high performance UART offering data rates up to 5 Mbit/s, low operating and sleeping current; it also provides the application with 8 additional programmable I/O pins. The device comes in very small HVQFN32 and TSSOP28 packages, which makes it ideally suitable for hand-held, battery-operated applications. This chip enables seamless protocol conversion from I2C-bus/SPI to RS-232/RS-485 and is fully bidirectional.

The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752, and in that it supports IrDA SIR up to 1.152 Mbit/s. In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752.

General features:

• Dual full-duplex UART
• I2C-bus or SPI interface selectable
• 3.3 V or 2.5 V operation
• Industrial temperature range: -40 °C to +95 °C
• 64 bytes FIFO (transmitter and receiver)
• Fully compatible with industrial standard 16C450 and equivalent
• Baud rates up to 5 Mbit/s in 16´ clock mode
• Auto hardware flow control using RTS/CTS
• Auto software flow control with programmable Xon/Xoff characters
• Single or double Xon/Xoff characters
• Automatic RS-485 support (automatic slave address detection)
• Up to eight programmable I/O pins
• RS-485 driver direction control via RTS signal

Applications:

• Factory automation and process control
• Portable and battery operated devices
• Cellular data devices