Référence fabricant
SX1230I066TRT
SX Series 315 to 915 MHz 600 Kbps SMT Integrated Transmitter IC - MLPQ-24
Semtech SX1230I066TRT - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Statut du produit:
Semtech SX1230I066TRT - Caractéristiques techniques
Frequency Range: | 315MHz to 915MHz |
Data Rate: | 600kbps |
Output Power: | 17dBm |
Supply Current: | 95mA |
Supply Voltage: | 1.8V to 3.7V |
Style d'emballage : | MLPQ-24 |
Méthode de montage : | Surface Mount |
Fonctionnalités et applications
SX1230: Integrated Transmitter IC Narrow/wideband 315 MHz, 434 MHz 868 MHz and 915 MHz band Transmitter
The SX1230 is a fully integrated transmitter which can operate in the 315, 434, 868 and 915 MHz licence free ISM bands.
The SX1230 features dual power amplifiers with 35dB programmable output power, ranging from -18dBm to +17dBm with a constant radio performance over the full power supply and temperature range. Semtech’s TrueRF technology reduces phase noise so that the SX1230’s performance is a full 10db higher than competing devices with a signal purity that simplifies regulatory testing in both Europe (ETSI EN 300-220-1) and North America (FCC part 15.231,15.247 and 15.249).The SX1230 can operate in the 315, 434, 868 and 915 MHz license-free ISM bands, and is power optimized for low consumption, drawing as low as 8mA depending on output power level.
The SX1230 features programmable data rates up to 600 kbps. It supports both narrowband and wide-band modes for use in professional and consumer applications such as automatic meter reading, remote control, and remote keyless entry. The flexible device operates in MCU mode where it acts as a system peripheral interface (SPI) slave, or in stand-alone SPI master mode, with control and payload information coming from externally connected programmable ROM (E2PROM) device.
The SX1230 is packaged in a 5 mm x 5 mm VQFN-24 package, and is RoHS & WEEE compliant.
Other Key Features Include:
- FSK, GFSK, MSK, GMSK and OOK modulation
- Consistent RF performance over a 1.8 to 3.7 V range
- Low phase noise (-95 dBc/Hz at 50 kHz) with automated PLL calibration and fully integrated VCO and loop filter
- MCU & Stand-alone Operating Modes
- On chip RC timer for timer / wake-up applications
- Low battery detection
Emballages disponibles
Qté d'emballage(s) :
3000 par Reel
Style d'emballage :
MLPQ-24
Méthode de montage :
Surface Mount