Référence fabricant
GS2965-INE3
GS2965 Series 3.3 V 27 MHz Multi-Rate Serial Digital Reclocker - QFN-32
| | |||||||||||
| | |||||||||||
| Nom du fabricant: | Semtech | ||||||||||
| Emballage standard: | Product Variant Information section Emballages disponiblesQté d'emballage(s) :490 par Tray Style d'emballage :QFN-32 Méthode de montage :Surface Mount | ||||||||||
| Code de date: | |||||||||||
Semtech GS2965-INE3 - Spécifications du produit
Informations de livraison:
ECCN:
Informations PCN:
Description, Purpose and Effect of Change: DUAL SOURCING Semtech has qualified Greatek in Taiwan as a second assembly source for the affected part numbers listed on the following page. This change applies to 16MLPQ 4x4mm and 32MLPQ 5x5mm packages, currently assembled by UNSIEM(M) in Malaysia. Please see attached for comparisons on process flow, material, and equipment. Test platform and test programs are unchanged.
Statut du produit:
Semtech GS2965-INE3 - Caractéristiques techniques
| Type: | Clock Oscillator |
| Operating Frequency: | 27MHz |
| Supply Voltage-Max: | 3.3V |
| Number Of Timers: | 2 |
| Rated Power: | 180mW |
| Operating Temp Range: | -40°C to +85°C |
| Style d'emballage : | QFN-32 |
| Méthode de montage : | Surface Mount |
Fonctionnalités et applications
The GS2965-INE3 is a multi-rate serial digital reclocker, designed to automatically recover the embedded clock from a digital video signal and retime the incoming video data, available in a QFN-32 package.
The GS2965 can operate in either auto or manual rate selection mode. In Auto mode, the device will automatically detect and lock onto incoming SMPTE SDI data signals at any supported rate. For single rate data systems, the GS2965 can be configured to operate in Manual mode.
Features:
- SMPTE 424M, SMPTE 292M and SMPTE 259M-C compliant
- Supports DVB-ASI at 270Mb/s
- Single supply operation at 3.3V or 2.5V
- 180mW typical power consumption (213mW with RCO enabled) at 2.5V
- Input signal equalization and output-signal de-emphasis settings to compensate for board-trace dielectric losses
- 2:1 input multiplexer patented technology
- Choice of dual reclocked data outputs or one reclocked data output and one clock output
- Uses standard 27MHz crystal
- Differential inputs and outputs
- support DC coupling to industry-standard differential logic
- on-chip 100Ω differential data input/output termination
- selectable 400mVppd or 800mVppd output swing on each output
- seamless interface to other Gennum products
- 4 wire SPI host interface for device configuration and monitoring
- Standard logic control and status signal levels
- Auto and Manual modes for rate selection
- Standards indication in Auto mode
- Lock Detect Output
- Mute, Bypass and Autobypass functions
- SD/HD indication output to control GS2978 or GS2988 dual slew-rate cable drivers
- Operating temperature range: -40°C to +85°C
- Small footprint QFN package (5mm x 5mm)
- Pb-free and RoHS compliant
Applications:
- SMPTE 424M, SMPTE 292M and SMPTE 259M-C coaxial cable serial digital interfaces
Emballages disponibles
Qté d'emballage(s) :
490 par Tray
Style d'emballage :
QFN-32
Méthode de montage :
Surface Mount